About Us
About Windsor Door
Windsor Door came into existence just 2 years after World War II was over in a small company that started as a manufacturer of folding attic stairways. The first sectional steel garage door, namely the Won-Dor, was designed by a businessman from Detroit in the late 1940s. The Su-un won through the sales and became part of the Sears Roebuck Corporation.
From the parent company, Windsor Door was obtained in 1961 and subsequently the name was changed. Two years later, in 1963, the company set up a $ 200,000 facility in Little Rock, Arkansas, where it unveiled its pioneering tongu&groove sectional door model that turned into a new industry standard.
Windsor was acquired in 1969 by CECO Corporation from the long-running owner C.E. Webb S&r who had owned the company since 1954. Windsor subsequently had a variety of ownership changes with agreements through mergers and acquisitions for next four decades.
In the year 2011, Garage Door Services of Houston gained the assets of the company and then they restored the original brand, putting the name back on the market as Windsor Door.
Residential Doors
Residential Garage Doors
Model 730
The 730 is a choice that can withstand even the most challenging conditions of the job site, thanks to its enduring durability and the reliability it affords, all of this on a tight budget. You can rely on it as it has construction with 25-gauge steel, which implies the strength of it. In addition to performance, the optional Rough Tex-backed insulation allows the panels to operate absolutely smoothly and at the same time it is a barrier against the elements.
Build
The Model 730 is constructed out of 25-gauge steel, making it suitable for both residential and light commercial construction where it would have to endure long wear and tear and also dependably perform.
Panel Styles
Offer your home the choice of three different panel styles for a better match with your aesthetic:
Raised Panel- Carriage House
- Ranch Panel
Insulation Options
The Model 730 comes with an option of 2” laid-in-place polystyrene insulation installed or not. With insulation, the vinyl layer that attaches to it secures the insulation and boosts multi-directional heat flow,so the system achieves an R-value of 6.0 or higher.
Model 750
Windsor Model 750 is designed for long-term function and aesthetic. It has a thickness of 2 inches, and is made from 24-gauge steel, which means it is one of the heaviest duty doors on the market. Its construction is as simple as it is strong and its long-lasting service is the proof of that. It can be customized with the optional CFC-free laid-in-place polystyrene insulation, which besides increasing energy efficiency, also provides the door with a thermal R-value of 6.0.
The Windsor Model 750, which comes with four panel designs, eight standard colors, and several decorative window options, is an excellent mix of style, strength, and value.
Key Features
Built for durability
Model 750 is really strongly reinforced by a galvanized steel end and center stiles that make it rust and corrosion resistant, guaranteeing the router be sane in every condition.
Sealed from the Elements
The design of the tongue-and-groove section joints is so perfect that they fit well to achieve the tight weather-resistant seal that can keep rain, wind, and debris out.
Tog-L-Loc™ Fastening System
This advanced fastening system guarantees leak-proof and rust-resistant joints thus increasing the lifespan of the door and its long-term reliability.
Enhanced Bottom Seal
The bottom of the door has a strong bulb-style vinyl that acts as a weather seal. This seal plays a key role in keeping out excess moisture, light, and drafts, thus ensuring the full comfort and efficiency of the room.
Quiet, Smooth Operation
The 750 model comes fitted with the high-quality galvanized steel hinges to complete the self-lubricating rollers, which are designed for quiet, smooth operation and less maintenance in the long run.
Optional Insulation for Comfort & Savings
The second option is a 2” CFC-free polystyrene insulation that has a special bonding to a white vinyl backing. The door also becomes more energy efficient and the indoor climate is better controlled with this upgrade- it has the R-value tested at 6.0.
The Model 750 dovetails though making reliable, user-friendly options for the homeowner who desires both beauty and function.
Model 790 - Windsor's Top Steel Garage Door
Windsor's Door Model 790 is the most enduring, best insulated, and most excellent-performing model in the entire product range of Windsor. If you are in search of the highest-quality steel garage door in the industry, the 790 is the most uncomplicated model to meet all your needs.
The door is constructed with 2" thick material, featuring a 25-gauge steel front and back skin that encapsulates a polystyrene foam core. A factory-installed thermal break and a full vertical hinge plate deliver exceptional energy efficiency and long-lasting quality—securing the entrance against the elements and allowing you to enjoy indoor comfort freely.
Highlight Features
- 25-gauge steel front and back skins
- 2" thick CFC-free polystyrene insulation
- Thermal break for improved energy control
- Full vertical hinge plate for added structural integrity
- R-value of 9.0 or higher for excellent thermal performance
Strength and Efficiency as the Core Structures
The 790, which is made of the best 25-gauge steel, is made to resist day-to-day damage while retaining its features and functions. The addition of double steel layers and thermal break makes it a reliable choice for all the weather conditions.
Color and Size Options
The 790 can be ordered with various sizes and color options, making it easier to find a design that fits your home. The double steel skin and foam insulation together provide an excellent R-value of 9.0+, which is a decisive factor in your greenhouse considerations.
Express Your Style
The 790 fully embodies the individualization program. You can have a large selection from:
- Different panel styles and colors
- Decorative window options and inserts
- Upgraded hardware packages for longer durability
- Optional aesthetic enhancements for higher curb appeal
Quality, energy efficiency, or exterior charm are sufficient reasons to upgrade into Model 790, which is the perfect combination of pure custom design and premium engineering.
Commercial Doors
Commercial Garage Doors
Model 200 – Built for Tough Industrial Demands
The Model 200 features 2-inch thick panels that offer outstanding impact resistance and structural integrity. Each panel is finished in pre-painted white steel on both sides and incorporates tongue-and-groove meeting rails for a tight, weather-resistant seal.
Structural Reinforcement
- Panels are roll-formed with six longitudinal ribs and two flat bottom v-grooves for added strength and rigidity
- Hot-dip galvanized steel end caps and intermediate stiles enhance corrosion resistance
- A bulb-style bottom weather seal keeps out moisture, wind, and debris.
Tog-L-Loc™ Fastening System
This advanced mechanical fastening system creates leak-proof and rust-resistant joints, increasing the door’s structural durability. It eliminates the need for traditional welding, reducing exposure to gases and moisture often found in welding environments—ideal for harsh industrial settings.
Precision Counterbalance System
- Equipped with oil-tempered, helical-wound torsion springs
- Features solid or tubular steel shafts
- Uses cast aluminum cable drums. Together, these components ensure smooth, reliable operation and long-term performance.
Heavy-Duty Track & Hardware
- 2" or 3" galvanized steel tracks with inclined verticals for a tight jamb seal
- Reinforced horizontal tracks with galvanized angles for added strength
- 14-gauge galvanized hinges and ball-bearing steel rollers with hardened races
- Aircraft-grade galvanized steel lift cables for exceptional strength and dependability
Available Sizes
- Widths: Up to 24' 2"
- Heights: Up to 20' 1"
The Model 200 is a high-performance, industrial-grade garage door that’s engineered for reliability, customization, and strength. Its rugged construction and range of options make it an excellent choice for demanding environments where durability and operational efficiency are critical.
Model 240 – Built to Meet the Demands of the Industry
The Model 240 is made to endure the challenges that realworld industrial environments throw back at it. The door is built for proof by 24-gauge all-steel primed sections and then exploded using Tog-L-Loc® mechanical fastening system, which is why this door is such a good deal. Strength, dependability, and life span are all the things that this door offers. You can rely on the Model 240, not only for its versatility but also for the fact that it is covered by a 5-year limited warranty and can be used in various commercial and industrial applications.
Main Features & General Description
Robust and Secure Structure
The use of 24-gauge prepainted galvanized steel to construct the Model 240 makes it heavily-resilient in tough environments. The robust construction means that it's going to perform well over time, and it comes with a multiline 5-year warranty, backing it up.
Primary Features Include
- 2" thick door panels for enhanced impact resistance
- Tongue-and-groove meeting rails for a tight, weather-resistant seal
- Tog-L-Loc™ fastening system, providing leak-proof, high-strength connections without welding
Smooth Counterbalance System
The Model 240 has a counterbalance system consisting of: Oil-tempered, helical-wound torsion springs
A tubular or solid steel shaft
This system lets the doors operate in a way that is low-friction, and the service life is out of sight.
Dans Track & Hardware
- Hot-dipped galvanized steel tracks, designed for tight closure at the jambs
- Heavy-duty galvanized hinges for added strength
- Steel ball-bearing rollers, ensuring smooth and consistent performance with reduced wear
The Model 240 is the best combination of durability, function, and value, which is the reason why it is a suitable option for industrial and commercial infrastructures that demand rigorous operation and commitment over a long period.
FAQs
Frequently Asked Questions
Yes, Windsor Garage Doors are widely considered reliable and durable, especially for both residential and commercial applications. Here's why Windsor is recognized as a dependable choice:
Why Windsor Garage Doors Are Considered Reliable
✅ Proven Track Record
Windsor has been in the industry since the late 1940s, with decades of experience designing and manufacturing garage doors known for performance and quality.
✅ Heavy-Duty Construction
Models like the 730, 750, and 790 are built with 24 or 25-gauge steel and feature robust insulation options, durable stiles, and corrosion-resistant materials.
✅ Tog-L-Loc™ Fastening System
This patented system provides leak-proof and rust-resistant joints, enhancing structural integrity and extending the door’s lifespan without the need for welding.
✅ Energy Efficiency Options
Insulated doors with polystyrene foam offer thermal efficiency with R-values up to 9.0, making them ideal for climate control and energy savings.
✅ Smooth Operation & Longevity
Windsor doors are equipped with galvanized steel hinges and self-lubricating rollers, delivering smooth, quiet, and long-lasting performance.
✅ Customization & Versatility
From panel styles and color choices to decorative windows and hardware, Windsor offers a wide range of customization to suit both form and function.
Windsor Garage Door Warranty Overview
Windsor Garage Doors offer limited warranties that vary by model, materials, and specific components. While exact terms may differ slightly based on product lines and installation practices, here’s a general overview of Windsor’s warranty coverage:
Standard Warranty Coverage (Most Models)
| Component | Coverage |
|---|---|
| Sections / Panels | 5-Year Limited Warranty (against defects in material and workmanship) |
| Hardware Components | Typically covered for 1 to 3 years, depending on the model |
| Paint Finish | Some models include 5-year paint warranty against cracking, peeling, or fading |
| Insulated Models | 5-Year coverage on insulation materials and delamination issues |
Model-Specific Examples
- Model 200 / 240 / 730 / 750 / 790 (Steel Models): Usually include a 5-year limited warranty on the door sections and insulation
- Commercial / Industrial Models (200 & 240): Same 5-year warranty on sections; hardware and springs may carry shorter coverage depending on usage.
What’s Typically Not Covered
- Normal wear and tear
- Damage from misuse or improper installation
- Accidental impact or weather-related damage (like hail or flooding)
- Failure to perform proper maintenance (lubrication, alignment, etc.)
Warranty Highlights
- Tog-L-Loc™ fastening system contributes to long-term panel durability, supporting the warranty’s strength.
- Warranties are typically non-transferable, meaning they apply only to the original purchaser/homeowner.
- Warranty claims often require proof of purchase and/or installation by an authorized dealer.
Prices
Our Prices
| City | 8' X 7' Model 730 | 16' X 7' Model 730 | 8' X 7' Model 750 | 16' X 7' Model 750 | 10' X 10' Model 200 |
|---|---|---|---|---|---|
| Dallas, TX | $875 | $1,750 | $975 | $1,900 | $2,400 |
| Fort Worth, TX | $875 | $1,750 | $975 | $1,900 | $2,400 |
| Austin, TX | $875 | $1,750 | $975 | $1,900 | $2,400 |
| Houston, Texas | $875 | $1,750 | $975 | $1,900 | $2,400 |
| San Antonio, TX | $875 | $1,750 | $975 | $1,900 | $2,400 |
| Plano, TX | $875 | $1,750 | $975 | $1,900 | $2,400 |
| Katy, TX | $875 | $1,750 | $975 | $1,900 | $2,400 |
| Sugar Land, TX | $875 | $1,750 | $975 | $1,900 | $2,400 |
| Arlington, TX | $875 | $1,750 | $975 | $1,900 | $2,400 |
| Frisco, TX | $875 | $1,750 | $975 | $1,900 | $2,400 |
